KS3 Clay Project – Coil Bowls

This is a super simple but REALLY effective clay project that my students love. I teach this clay coil bowl project to my Year 8 students and their results are lovely – and can take their plates home with them when they’re finished. The project is inspired by the coiling techniques and shapes used in traditional pueblo pottery.

Join 1,781 other followers

Coil bowl clay project Ks3
clay coil bowl art project
Advertisements

This clay coil bowl art project is great for the end of term as students can really get hands on, it’s fairly quick to get into and you can have them completely made after just two or three lessons. Plus students love taking their coil bowls home when they have been fired and painted!

The project is designed to introduce students to Pueblo pottery (ceramic objects made by the indigenous Pueblo people) and traditional techniques used for building pots such as coiling. Students learn about the tradition of coiling, pueblo pottery art and methods for painting clay that don’t involve glazes (too expensive for my department!). In researching for this project, I have had some fantastic help from Nancy at the Indian Arts Research Center and the Facebook group Art Teachers for Antiracist Curriculum.

Pueblo Pottery art lesson
Pueblo pottery art lesson

If you would like a copy of the resources for this project, just leave a comment below and I will share it with your email address.

I don’t have loads of storage in my classroom and some of my classes are huge (35 students) so when I was planning to teach this clay project I needed to think about storage too… Boring! But necessary.

We decided to use paper bowls to have students build their coils onto (wanting to reduce our plastic use across the department) and they were cheap to buy, however, I wish we had used just plastic plates or bowls instead πŸ™ˆ The paper ones didn’t last long, they sunk under the weight of the clay and some got soggy when students used too much water. Anyway, lesson learnt! Next time, I would use plastic bowls and keep them to reuse each year.

To store, we stacked the bowls up in trays at the end of each lesson with wet paper towels between them, then wrapped the stacks in bags to keep them damp for the next lesson.

Which materials do you need for this clay coil bowl project?

As I’ve been teaching I have slowly learnt that spending a bit more on better quality materials means they last longer. The wall mounted clay extruder has been an absolute lifesaver – the ability to hand-pull coils means building with clay is so much simpler. The blue clay tools are absolutely fine to use but are so easily broken that I have started to use these metal tools, gradually buying a few more each year, and they last so much longer.

This clay project is inspired by the coiling techniques used by indigenous Pueblo peoples, where the bowls are built from the middle and coils are added to the edge to build the bowl outwards. I taught the students here to add the coils in geometric shapes such as triangles and squares. Where the Pueblo pottery is smoothed both inside and out, these bowls are only smoothed on the outside, allowing the design of the coils to show once the bowl is turned over.


After an introduction to Pueblo pottery, students completed research pages about Pueblo Pottery in their sketchbooks. Since I didn’t have much time to deliver this project, I gave them one lesson and set a homework for them to finish their research.

Pueblo Pottery art research lesson

They were asked to answer questions in their research and include designs based on what they had seen so far – I also gave them handouts to use, which are included in the slides of the presentation. These are the questions students need to answer on their research pages:

  • What is the meaning of β€˜pueblo’?
  • How many separate pueblos are in New Mexico?
  • Where were the first bits of pottery discovered?
  • What was the pottery traditionally used for?
  • How was the pottery made?
Advertisements

Join 1,781 other followers

Next I introduced an overview of what students would be creating, they love the look of the coil bowls and the Indian inks with metallic dry brush really make their bowls vibrant – showing them this slide really motivated my students to take care with the clay and their designs.

Clay coil bowl easy art project

There is a great video showing the coiling process that I show to students (added in the presentation), then I have taken stills and included those on the slides too. I will eventually make my own video but, well… time!

Coil bowl clay art project lessons

I have included slides with clean up roles (essential for clay lessons!) and starters / entry tasks throughout the project that get students to consider the shapes they are making, and reflect on the work they have done. There are also peer assessment tasks which can be done as a discussion rather than having students get their sketchbooks / glue etc. out – I think there’s enough going on with all of the clay equipment everywhere.

All of the lessons in this project include entry / starter tasks (bell ringers) and plenaries or reflections for the end of the lesson. Sometimes if it was a practical lesson I have included numbered instructions for students to ensure clearing away was done properly.

Art starter tasks plenaries - clay coil bowls

This is a really fun clay project because the structure of the bowls is already in place, and as long as students smooth the outside of their bowl, they can’t really go wrong! I only spend two or three lessons on the actual building, as the clay needs about a week to completely dry out before being fired in the kiln.

Once their clay bowls had been fully coiled, smoothed, dried and fired, I introduced colour. I love the effect that metallic acrylic has on Indian inks, so I used this idea – but obviously you can paint or decorate them however you wish. I just like how the Indian inks spread and soak into the clay, but also leave a slightly glossy finish.

Clay coil bowls art lessons - indian ink decoration.

After a spot of dry brushing with the metallic acrylic paints, the clay bowls were finished and ready to take home – students loved them! What do you think? If you’d like a copy of the resources just leave a comment below and I will share the presentation with your email address πŸ™‚

Advertisements

146 thoughts on “KS3 Clay Project – Coil Bowls

  1. Your projects are always so inspiring! I’ve been doing Day of the Dead skulls in clay with ours but this would also be a great one to do for shorter timescale or Art club. – would you mind sending me your ppt? thanks ever so much!

    Liked by 1 person

  2. Just what I’m looking for. You have described all of the different stages in such great detail, including any pitfalls. Thank you.
    Please may I have a copy of your resources?

    Liked by 1 person

  3. This looks like such a cool project! I can see this being one of those projects where the kids are begging to take them home the minute they’re done. May I have the lesson plan/materials list for this? Thanks!

    Liked by 1 person

  4. Hello! These are really beautiful and would be awesome for my 5th graders! I’d love the other resources you mentioned and THANK YOU for sharing!!

    Liked by 1 person

  5. This is remarkable. I’d love a copy! My district is trying to start a ceramics program at the MS level for me — I’m new there, and clay is such a passion! It was the first thing I asked for!

    Liked by 1 person

  6. I love the historical-cultural aspect. It’s so important for students to know their history and feel connected to other cultures through their work. I’d love to share this with my middle school students if you’d share your lessons with me. Do you think it might work with elementary? I teach K-8. Thank you!

    Liked by 1 person

    1. I’m not sure what K-8 is as I’m in the UK, but I think you could try this with younger students. Maybe start small (tiles?) and try the coil shapes like circles or triangles on their own. Then move onto placing the coils over a mould and smoothing one side. I’d love to know how you get on!

      Like

  7. Just lovely! Would you mind sharing your resources with me? I think this is just the right kind of clay project for my art students. Thanks so much for your generosity!

    Liked by 1 person

Leave a Reply to Kimberly Spears Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s